E-max CAD
IPS e.max CAD is a lithium disilicate glass-ceramic block for the CAD/CAM technique. It is fabricated using an innovative process which provides an impressive homogeneity of the material. The block can be processed very easily in
a CAD/CAM unit in this crystalline intermediate stage. The typical and striking color of IPS e.max CAD ranges from
whitish to blue and bluish-grey. This shade is a result of the composition and the microstructure of the glass-ceramic
Indications
Crowns and minimally invasive crowns (1 mm)3
Inlays, onlays, partial crowns
Veneers, thin veneers (0.4 mm) and occlusal veneers
Three-unit bridges (up to the second premolar as the terminal abutment)
Implant-supported hybrid hybrid abutment crowns
| Technical details |
Parameters |
| CTE (100-400°C) |
10.2 * 10⁻⁶ K⁻¹ |
| CTE (100-500°C) |
10.5 * 10⁻⁶ K⁻¹ |
| Bending strength |
360 MPa |
| Crystallization temperature |
840–850°C |
|
| wall thickness |
0.4 mm |
| Connector dimensions |
9 mm² – 15 mm² |
|
| Available colors |
Remarks (regarding all available shades) |
| VITA A2, A3, A3.5, A4 |
Only C14 block size
Only LT (Low Translucency) blocks available |
| VITA B1, B2, B3, B4 |
| VITA C1, C2, C4 |
| VITA D2, D3, D4 |
|
|
