skip to Main Content

HEXA uses a Promaker D35 3D printer to produce its 3D dental models. This printer has 2 printing heads that can
print with a layer thickness of 25-150 micrometer and a resolution of hundreds of millions of pixels per layer. The
printer is compatible with 356-nm UV resin which is ideal for a wide variety of applications.

FotoDent® LED.A model FotoDent® gingiva 50/70
Colours opaque beige,
Density 1.1–1.2 g ml-1
Viscosity (23°) 1.15–1.4 Pa s
Modulus of elasticity 1700 – 2200 Mpa
Bending strength 90 –115 Mpa
Elongation at break 8 –10 %
Hardness 80– 84 Shore D
Penetration depth Dp: 141 μm (5.55 mils)
Critical energy Ec: 5.0 mJ cm-2
Colour pink
Density 1.1–1.2 g ml-1
Viscosity (23°) 0.8 Pa s
Tensile strength 8 Mpa
Tensile elongation 92%
Hardness (23°) 70 Shore A / 80 Shore A
Hardness (37°) 50 Shore A / 70 Shore A
Absorption of water 17 μm mm-3
Tear strength 22 N mm-1
Penetration depth Dp: 85 μm (5.55 mils)
Critical energy Ec: 38 mJ cm-2
Back To Top